Safety measures should be considered before starting the engine of your machine

Below are a few tips to help you.

Inspect the engine for potential hazards such as hazardous exhaust gas leaks, fuel and oil leaks, or the cooling fan not protected with a safety guard
Ensure that all protective guards and covers are in place
Inspect the cooling system hoses for cracks and loose clamps. Ensure that the coolant level is correct
Check the engine lubrication oil level. Maintain the level between the “ADD” mark and the “FULL” mark on the oil level dipstick
Observe the air cleaner indicator. Service/change the filter when the red piston locks in the visible position
Inspect the alternator and cooling fan drive belts for cracks, breaks etc.
Check the fuel supply. Drain water from the water separator
Never bypass or disable the automatic protective shutoff circuits

Contact us NOW for technical queries:
Tel (office hours): +21 11 842 5770
24 hr Standby: +27 82 944 9005 or +27 71 686 4956
Email:helpdesk@pilotcrushtec.com

  • This field is for validation purposes and should be left unchanged.