Pre-Owned
A range of premium, fully-refurbished pre-owned crushing and screening equipment to suit your requirements.
Pre-Owned
Pilot Crushtec supplies premium pre-owned crushing and screening mining equipment to suit your requirements. All our stock machines go through a strict service and refurbishment exercise by our team of expert OEM technicians to ensure that the equipment is up to crushing and screening standards. At Pilot Crushtec, we also offer the option to restore the equipment back to OEM spec.
Browse our current refurbished mining equipment to find the one that best meets your crushing and screening needs.
Metso LT1213S
Lokotrack® LT1213™ mobile HSI crusher is known for high tonnage and efficient fuel economy. It is equipped with a horizontal shaft impact (HSI) crushing unit and can operate as a primary or secondary crusher. In applications such as coal, processing concrete, asphalt and demolition waste the LT1213S is particularly suited.
The LT1213S can accept a 600mm lump size and has a very high reduction ratio. The re-circulating conveyor feeds oversized material back into the feeder for a second pass through the crushing chamber, so no need to rehandle material. The unit includes a vibrating grizzly feeder for fines removal prior to the crushing chamber. The rotor on the NP1213 Impact crusher has variable speed for optimization of the crushing output.
The LT1213S includes a modular overhanging screen on the discharge belt which has a 1.3m x 3m screen to remove oversized material and recirculate this material back into the crusher.
Specifications overview
| Engine | Caterpillar C12 317kW |
|---|---|
| Owners | One (1) |
| Country of Operation | South Africa |
| Application History | Dolomite |
| Service History | None |
| Technical data | Crusher & Rotor Completely Refurbished.
New Hammers and Liners inside Crushing Chamber All Bearings Replaced All Rollers Replaced Hydraulic Pump Replaced Hydraulic Drive Motor Replaced Hydraulic Main Pump Replaced Conveyor Motors Replaced All Pulleys Replaced Feeder Completely Refurbished Refurbished Hanging Screen – Refurbished Circulating Conveyor Belt Magnet Replaced CAT C12 Engine Completely Refurbished and Dyno Tested Hydraulic Hopper wall adjustment Wedge securing system for hopper walls |
| Output Capacity | 340tph |
| Other Comments | The machine refurbishment process took approximately 9 months to complete. The unit has been stripped down completely for refurbishment purposes and is in excellent running condition. |
MACHINE Information
| Model Name | LT1213S |
|---|---|
| Serial number | 20360284 |
| Year of Manufacture |
2005 |
| Hours | N/A |
| Price | R9,900,000.00 Ex VAT |
| Warranty | 3 Month Limited |
| Condition | Completely Refurbished – Excellent |
Should you be interested to view this unit, please contact us at (+27) 11 842 5600 or alternatively email us at sales@pilotcrushtec.com
Nordtrack S2.11
The Nordtrack™ S2.11 mobile scalping screen is large mobile scalping screen. This mobile scalper gives you the flexibility to screen a wide variety of feed materials in different mineral ore, aggregates recycling, demolition and mining applications.
This massive screen box measures 6,1m x 1,8m and has an 11m3 hopper capacity for accepting large feed volumes from an excavator.
This unit is built to be robust and simple in operations with hydraulic levers for manual functions which makes operations easier. This mobile scalping screen is recommended for a maximum of 800tph.
Specifications overview
| Engine | Caterpillar C7.1 209 kW Constant Speed Drive Engine (Tier 3) |
|---|---|
| Owners | One (1) |
| Country of Operation | Namibia |
| Application History | Mineral ore |
| Service History | OEM |
| Technical data | Main Dimensions of Unit during Operations:
Weight – 37 200kg Hydraulic Tank Capacity – 800l Working Lights – Standard Feed Conveyor – Apron Feeder Feed Hopper – Loading Height (Screen 17ͦ)– 3 680mm Feed Hopper – Loading Width – 3 900mm Hopper Volume – 11.5m3 Two (2) Deck Screen Box Screen Area – Top Deck – 11.2m2 Screen Area – Bottom Deck – 10m2 Screen Size – 6 100mm x 1 830mm Stroke – 8-10mm maximum Tensioning Top Deck – Quick release pin and wedge Tensioning Bottom Deck – Curved Tension Bar and Adjuster |
| Output Capacity | Recommended for a Maximum of 800tph |
| Other Comments | This unit is available immediately and comes equipped with bofar bars fitted to the top deck and square screen mesh on the bottom deck. |
MACHINE Information
| Model Name | Nordtrack S2.11 |
|---|---|
| Serial number | 1900342 |
| Year of Manufacture |
2021 |
| Hours | 1,495 |
| Price | R5,250,000.00 Ex VAT |
| Warranty | N/A |
| Condition | Excellent |
Should you be interested to view this unit, please contact us at (+27) 11 842 5600 or alternatively email us at sales@pilotcrushtec.com
Sandvik uh440
The Sandvik UH440 is a track mounted, cone crushing and screening unit on a single chassis. Its innovative design combines the CH440 Cone crusher with a dual-slope main screen for high-capacity, accurate screening and recirculating and stock piling conveyors.
The UH440 is electrically powered; the process is powered by a Volvo power pack installed in a soundproof container. This feature improves the energy efficiency of the unit compared with previous models. Low operating costs are but one of the economical features of this unit.
Special attention during the engineering work was paid to maintainability and uncomplicated usability to maximize uptime and productivity. This unit has been completely stripped, refurbished and rebuilt, including the CH440 cone. The cone crusher has been fitted with a new OEM head and shaft assembly and internal components; new conveyor belts all round. All drive pulleys have been replaced.
The SS1221 pre-screen is new and includes 2 new feeder motors as well. The LF1850 Double deck screen has been completely refurbished and fitted with new components. The complete electrical system has been refurbished. A new PLC, soft starter, circuit breaker and new sensors and contactors have been installed where necessary.
These have been re-programmed back to OEM standard including process control through the OEM standard ASRI process control and management system. The entire Hydraulic system has been refurbished. The entire track assembly has been refurbished. All cylinders throughout the machine have been refurbished. Below is a detailed table of new components installed.
Specifications overview
| Engine | Squirrel cage motor 200 kW/1500 rpm Volvo TAD 1654 GE diesel generator package (500 kVa ) |
|---|---|
| Owners | One (1) |
| Country of Operation | South Africa |
| Application History | Aggregates |
| Service History | OEM |
| Technical data | Feed opening: Max Feed Opening 215mm
Minimum ccs: 8mm. Crusher: Sandvik CH440 (S/N 0990314086). Drive: : Squirrel cage motor 200 kW/1500 rpm. EXTRAS: Fully automated process Multiple concave options and bush settings (highly versatile) Diesel electric drive for powerful, economical, and environmentally friendly operation Unique loop conveying system providing direct feed to product screen Capable of working in a train or as a standalone unit Feeder: SS1221 Feeder Completely new Magnetic seperator: Metal Detector before cone |
| Output Capacity | 250-300 tph |
| Other Comments | Major Items Replaced on the unit:
Main shaft & head assembly • Crusher motor • Track Motors LH & RH side • Hydro Set Pump • Head centre • Spider Bush, Cap & Seal with new grease • Mantle & Bowl (EC) as well as Backing • Step bearing & Spacer • Head Step Plate • Inner eccentric bush (24/28/32) • Eccentric bush • Bevel & Pinion gear • Pinion Lube Pump • Concave support ring • Head nut • Bearings • Inner & outer spacers & seals • Gaskets • Oil • Piping • Gauges (pressure & temperature) • V-Pulleys & SPC 4000 • Drive Pulleys Replaced components cont: • Transport Pins • Filters • Gaskets • Oil • Piping • Gauges (pressure & temperature) • PLC programmed to Sandvik OEM specification • Soft starter • Main Circuit Breaker • Sensors • Heater Element • New access ladders • Contactors • 2 new feeder motors • Conveyor belts • Dual-Slope LF1850 screen bearings • SS1221Feeder Bearings Refurbished Components: (Machine has been fully refurbished) • Full Hydraulic System • Cylinders throughout the machine • Pinion Housing • Repainted • Feeder refurbished • Dual-Slope screen refurbished • Accumulator |
MACHINE Information
| Model Name | Sandvik UH440 |
|---|---|
| Serial number | W001006 |
| Year of Manufacture |
2014 |
| Hours | 11,425 on Crusher (Fully refurbished & rebuilt) |
| Price | R12,000,000.00 Ex VAT |
| Warranty | 3 Months |
| Condition | Excellent |
Should you be interested to view this unit, please contact us at (+27) 11 842 5600 or alternatively email us at sales@pilotcrushtec.com
MACHINE SPECIFICATIONS
| Engine | Caterpillar C15, 403kw, Tier 3 |
|---|---|
| Owners | N/A |
| Country of Operation | South Africa |
| Application History | Aggregates |
| Service History | OEM |
| Technical Data | Max Feed Size: 55mm (Passing 45mm Square Mesh)
Rotor Size: 900mm/1000mm Rotor Speed: Up To 1650rpm Drive: Hydraulic Discharge Conveyor: Belt Width 1200mm With Hydraulic Folding For Transport, 3.7m Stockpile Height Feeder: 6m3 Hopper |
| Output Capacity | Up To 350tph Throughput Through The Rotor |
| Other Comments | Machine Is In Good Condition With Very Low Hours |
MACHINE Information
Should you be interested to view this unit, please contact us at (+27) 11 842 5600 or alternatively email us at sales@pilotcrushtec.com
| Model Name | PILOT CRUSHTEC TWISTERTRAC VS350 |
|---|---|
| SERIAL NUMBER l | PCTTT002NJPEA1020 |
| Year Model | 2014 |
| Hours | +-750 HOURS |
| Price | POA |
| Warranty | None |
| Condition | Good |
Should you be interested to view this unit, please contact us at (+27) 11 842 5600 or alternatively email us at sales@pilotcrushtec.com